Best Wood Planers 2017

While the wood planer and jointer are similar tools that can be used on the same piece of wood, some people may think that these tools are interchangeable.

Differences Between a Wood Planer and a Jointer

Planer Reviews 2017

A wood planer, on the other hand, cuts pieces of wood to the necessary thickness. The original wood plane was a handheld tool that dates back to the medieval times, but is still quite useful today. However, the modern wood planer uses electricity and is much more efficient than its manual counterpart. The wood planer has a cutter head that planes the surface of the board. The wood goes in one end of the wood planer and passes the cutter, led by a guide wheel. It comes out perfectly cut to the desire thickness. A wood planer is also used to create perfectly parallel faces. Usually, the board needs to have one reference surface (which can be achieved by a jointer), which is placed facing down on the table, and then the wood planer will create a parallel side on the opposite surface.

A jointer is a tool used for creating flat surfaces along a piece of wood’s edges and faces. Most pieces of lumber are sold as rectangle boards, which can be custom cut into different lengths, widths, and thicknesses. However, when large pieces of wood are cut down to size, the surfaces are not even. A jointer works by flattening the faces and edges of the wood. The piece is placed on the infeed table, where it passes over steel cutting blades, and then is pushed out the outfeed table. This process is repeated until all the sides are smoothed out. Perfectly even faces are much more attractive than uneven ones, but jointers are primarily used to ensure two pieces of wood can be joined together without any problems.

A user would need to determine the type of wood, check the edges and surfaces, check the flatness of the wood, determine the required measurements, decide if there’s a need for parallel surfaces, find imperfections, and check the wood for twisting to determine which tool is needed.


9 Best Planers 2017


What is the best Planer on the market today? There are tons of Planers out there, we did a lot of research on Planers to save your precious time and money. Here are our best Planers 2017:

#1. JET – JWP-208HH Helical Head Planer, 20-inch

  • Two speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs
  • Large, cast iron, precision ground table for precise work piece support
  • Positive gear drive moves table quickly and accurately
  • Cast iron in feed and out feed tables come with the machine
  • Large hand wheel with positive gear drive allows for quick and accurately table adjustments
  • 1/16” increment height scale lets you make the most precise adjustments for fine cuts
  • one piece welded steel base offers solid support and stability
  • Cutter head diameter: 3.19”
  • Cutter head speed: 5000 RPM
  • Feed Rate: 24 and 31 FPM
  • number of Knives: 92 four sided inserts
  • Table size: 25 0.75” x 20”
  • Dust Port diameter: 5”
  • number of speeds: 2
  • Range of speeds: 24 and 31 FPM
  • Heavy duty cast iron and steel construction for added strength and durability
  • Helical cutter head with index able carbide inserts for a superior finish and quieter cut
  • Powerful 5 HP TEFC induction motor with three V belt transmission for smooth and consistent power
  • 5” dust port provides efficient chip and dust collection -Dust collection minimum cfm required: 400 cu.ft/min

Planer Reviews 2017Pros: fantastic and worth every penny, the helical knives are incredible, the finish with the helical heads is excellent, this thing is unbelievably quiet and very smooth, it very handy and accurate, the cast iron infeed and outfeed tables are great and machined very well, this planer is spitting out boards at a crazy speed, 5 year warranty …

Cons: expensive, ability to make nice furniture from rough-cut boards …

=> Buy JET – JWP-208HH Helical Head Planer

 

 

 

 

#2. JET 708476 Model JJP-12HH Planer, 12-Inch

  • Extra large aluminum extruded fence with centered controls for quick adjustments
  • Extremely quick changeover between jointing and planning functions
  • Fence does not need to be removed
  • Built-in dust chute with 4” dust port used for both jointing and planning operations
  • Large hand wheel for quick and precise adjustments of planer table
  • Magnetic switch provides safer and more reliable operation
  • Cutter head speed: 5500 RPM
  • Cutter head diameter: 20.75”
  • Motor current: 12.5 A
  • Motor phase: 1 Ph
  • Heavy duty, one piece steel closed stand includes mounting tabs for increased stability
  • Helical cutter head with index able carbide inserts for a superior finish and quieter cut
  • Parallelogram design keeps the table close to the cutter head for improved finish and allows for precise depth of cut adjustments
  • Heavy duty cast iron tables with a machined finish to ensure accuracy and flatness
  • Powerful 3HP induction motor easily handles the toughest jointing and planning tasks

Planer ReviewsPros: quick delivery service, it takes up less space, very good fit and finish on machine, it has the weight and solid feel of a pro grade cast iron tool, no worries about tear-out and no worries about changing blades, the fence has worked perfectly, very fast switch between jointing or planing modes, quiet operation and adequate chip control, the 12″ width is wonderful because no more hassle with boards too wide for the jointer …

Cons: pretty hot when running for a long time …

=> Buy JET 708476 Model JJP-12HH Planer

 

 

 

 

#3. DEWALT DW735X Two-Speed Planer Package, 13-Inch

  • The DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease
  • The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
  • The two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • It has a fan-assisted chip ejection that vacuums chips off of the cutter-head and exhausts them out of the machine
  • With a 19-3/4″ cast aluminum base it is 2X more rigid than a standard 10″ base and folding tables
  • The automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
  • It also has a material removal gauge and extra-large thickness scale that deliver accurate cuts with every pass
  • The extra-large turret depth stop allows users to return to most frequently used thicknesses with ease
  • Includes infeed and outfeed tables and an extra set of knives

Planer Review 2017Pros: fast shipping, good service, this is a great addition to our professional woodworking tools, the quality of finish is exceptional, absolute great planer at reasonable price, all the controls and settings are pretty straight forward and within easy reach, feeds the boards through nice and smooth, with a 3 knife planer you get such smooth finishes you can almost do away with the sanders, very smooth results, the dust collection exhaust is fantastic …

Cons: you won’t be happy with all the blade changes, it will not take more material off on one pass …

=> Buy DEWALT DW735X Two-Speed Planer Package

 

 

 

 

#4. Makita 2012NB Planer with Interna-Lok Automated Head Clamp, 12-Inch

  • The Makita 12-Inch Portable Planer delivers portability and productivity with a compact design, quieter operation, and faster, easier blade changes
  • The 2012NB features Makita’s exclusive Interna-Lok automated head clamp to eliminate snipe for improved planning performance
  • The 2012NB features a 15 AMP motor with a no-load speed of 8,500 RPM and the quietest (83 dB) operation in its class
  • It has a four-post design and diagonal cross supports for stability, with large table extensions to support the work piece and fully adjustable depth stops for repeat cuts
  • The 2012NB has a feed rate of 28 feet-per-minute, with an easily-adjusted cutting depth setting for precision planning (maximum thickness: 6-3/32 inches)
  • The 2012NB is compact and lightweight for easy transport to the job site
  • The 2012NB has faster and easier blade changes, and uses disposable double-edge planer blades
  • The L.E.D. light indicates that the planer is plugged into the power source, and the large paddle on/off switch is easy to operate
  • The 2012NB also has a detachable tool box for storage of the standard equipment
  • An optional dust hood enables a dust collection system to be connected to the planer

Planer ReviewPros: quality machine at good price, surpassed all expectations, this planer does a fantastic job, relatively quiet, the results of the different types of wood processed were very satisfactory, it planed a great surface, powerful and quite, no snipe if you feed properly and ample power for most tasks, the initial start-up very easy, blade setup is quick and easy …

Cons: the replacement blades are expensive …

=> Buy Makita 2012NB Planer with Interna-Lok Automated Head Clamp

 

 

 

 

#5. DEWALT DW734 15 Amp Benchtop Planer, 12-1/2-Inch

  • The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm
  • Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock
  • This Benchtop planer’s powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch
  • The DEWALT DW734 uses razor sharp knives that are reversible and disposable
  • These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening
  • For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp
  • The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris
  • This planer’s extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths
  • This sturdy planer weighs 80 pounds
  • It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches

Best Planer Reviews 2017Pros: delivery was fast, it doesn’t take up a lot of space, setting the planer for depth was quick and easy, the planner works very well, it planes hardwoods nicely, the cut measurements are perfect, very accurate, it actually takes a very nice thickness out per cut, leaves a pretty good edge, it will be a great addition to your shop or home

Cons: it takes much longer to process harder woods but it will do well

=> Buy DEWALT DW734 15 Amp Benchtop Planer

 

 

 

 

#6. Grizzly G0505 Planer, 12-1/2-Inch

  • Their portable planers have been so popular that they couldn’t resist giving their customers just one more option
  • For this they wanted a portable planer that was lighter to carry around and finished cuts faster but didn’t lack muscle or design quality
  • This new 12-1/2″ planer features a 2 HP motor 10 000 RPM cutter head 32 FPM feed rate top-mounted return rollers and extra large table extensions
  • Also other little things like 1/8″ thick knives are proof that this dynamo will rule the jobsite for years
  • Maximum cutting width: 12-1/2″
  • Maximum cutting height: 6″
  • Maximum depth of cut: 3/32″
  • Minimum board thickness: 13/64”
  • Two double edged HSS knives in cutter head
  • Cutter head RPM: 10 000
  • Feed Rate: 32 FPM
  • Number of cuts per inch: 52
  • 2 HP 110V 15 Amps
  • On/Off Toggle Switch with Safety Lock
  • Thermal overload protection
  • Top mounted return rollers
  • Includes knife setting jig and wrench

Best Planer ReviewsPros: priced right, worth every penny, greats for who need a small and accurate planer, didn’t have any detectable snipe, it does get the job done, no frills, quiet, solid, vibration free, powerful, smooth cutting, easy to setup, the depth gauge is accurate enough, overall satisfied with the performance of it …

Cons: maybe the feed rate is to fast …

=> Buy Grizzly G0505 Planer

 

 

 

 

#7. Delta Power Tools 22-555 Portable Thickness Planer, 13-Inch

  • Powerful 15A motor capable of handling the demands of a small shop
  • Four column design provides excellent stability for smooth, accurate planing over many years of use
  • Quick-change knife system with dual edge disposable knives lets you change knives without difficult to use alignment jigs
  • Adjustable infeed and outfeed tables to better support long pieces and reduce snipe
  • Reversible dust port allows you to collect chips from the right or left side of planer

Best Planer Review 2017Pros: reasonable price, you can’t find a better machine at this price, perfect for hobbyists or small shop, boards turn out beautiful and so smooth, extremely rapid cut with 13″ blades, produces quality cuts with very little snipe, effective dust collector, no snipe whatsoever, the tools to replace the blades when the time comes are conveniently attached to the planer safely, 5 year warranty …

Cons: it is much larger than one would expect, it is single speed feed …

=> Buy Delta Power Tools 22-555 Portable Thickness Planer

 

 

 

 

#8. Porter-Cable PC305TP Benchtop Planer, 12-1/2-Inch

  • Powerful, 15 A motor powers PORTER-CABLE PC305TP planer, allowing superior stock removal as its 8,000 RPM cutter head speed provides 16,000 cuts per minute
  • Two-knife, quick-change, solid steel cutter head mounted on ball bearings, assures smooth operation and long life
  • Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials

Best Planer ReviewPros: price is great for what you get, it is a good value for occasional planing jobs, quality is good, this planer for several hours straight with no problems, it gives a beautiful cut, the feed rollers worked great, the two blade system is really easy to change …

Cons: it’s a small bench-top planer, don’t expect to take off a bunch of material in one pass, adjusting the feed tables carefully will help minimize snipe…

=> Buy Porter-Cable PC305TP Benchtop Planer

 

 

 

 

#9. POWERTEC PL1251 15-Amp Planer, 12-1/2-Inch

  • Index pin set-up for EZ blade replacement. No blade gauge requirement
  • Four-column design for greater stability and accuracy
  • Work piece return roller for assistance when planning extra long boards
  • Side mounted carrying handles for portability
  • Spindle lock for safe blade Change

POWERTEC PL1251 15-Amp Planer, 12-1/2-InchPros: great service, it works good, no problem with adjustments, plenty of power, it has the power to handle hardwood easily, nice finish, easy to sand out …

Cons: maybe a little bit of snipe, it did not come with a dust collector …

=> Buy POWERTEC PL1251 15-Amp Planer